Sikaflex Urethane Installation Kit – 2 Tubes Urethane + Primer

Price
$29.95
Taxes and shipping calculated at checkout
PNW-Based Business

PNW-Based Business

Expert Advice Available

Expert Advice Available

Products Tested in Real Builds

Products Tested in Real Builds

Safe & Secure Checkout

Safe & Secure Checkout

High Top Vans Van Window Installation Kit – 2 Tubes Urethane + Primer

This is an installation kit used to install AM Auto cargo van windows. It includes primer and two tubes of urethane to mount the window to the van after the cut-out has been made.

Adhesive: Sikaflex® P2G is a one-component, cold-applied, quick-curing, high-viscosity polyurethane adhesive designed for use in replacing direct glazed automotive glass windows. Engineered to perform to the strength of OEM specs.

Primer: Included is a solvent-based black primer that acts as the base layer on your van wall to ensure proper adhesion of the urethane (adhesive).

Drive-away time: Sikaflex® P2G has a 6 hour minimum drive-away time (MDAT), tested to FMVSS 212 (federal windshield retention standard). MDAT is 4 hours at 85–110°F with relative humidity over 90%. Apply between 40 and 110°F ambient; do not use below 40°F. MDAT is the minimum drive-away time, not the time required to install the window.

The installation kit has an expiration date of roughly 3 to 6 months. It is expected to be used within 3 months of receiving or by the expiration date shown on each product.

Installation video: Watch how to install an AM Auto half-slider bonded (glue-in) van window

Key Features

  • AM Auto window compatibility: Used to install AM Auto cargo van windows after the cut-out has been made.
  • Sikaflex® P2G adhesive: A one-component, cold-applied, quick-curing, high-viscosity polyurethane adhesive designed for replacing direct glazed automotive glass windows, engineered to perform to the strength of OEM specs.
  • Solvent-based black primer: Acts as the base layer on the van wall to ensure proper adhesion of the urethane.
  • Coverage: Best used for 1 large side window, or for 2 small bunk windows.
  • 6 hour MDAT: 6 hour minimum drive-away time (MDAT), tested to FMVSS 212 (federal windshield retention standard). MDAT is 4 hours at 85–110°F with relative humidity over 90%. This is the minimum drive-away time, not the time required to install the window.
  • Application temperature: Apply between 40 and 110°F ambient. Do not use below 40°F.

Specifications

  • Kit: 42 Kit (2 tubes urethane + primer)
  • Window compatibility: AM Auto cargo van windows; 1 large side window or 2 small bunk windows
  • Adhesive: Sikaflex® P2G, 1-component moisture-curing polyurethane, black, 300 ml (10.1 fl oz) per tube
  • Primer: Solvent-based black primer
  • MDAT: 6 hours (minimum drive-away time), tested to FMVSS 212 (federal windshield retention standard); 4 hours at 85–110°F with relative humidity over 90%
  • Application temperature: 40 to 110°F ambient; do not use below 40°F
  • Skin time: 30 minutes
  • Open time: 15 minutes
  • Tensile strength: 5 MPa (750 psi)
  • Elongation at break: 400%
  • Lap-shear strength: 3 MPa (400 psi)
  • Hardness: Shore A 65
  • Service temperature: -40 to 200°F
  • Shelf life: Roughly 3 to 6 months; use within 3 months of receiving or by the expiration date shown on each product

What’s Included

  • 2x Sikaflex® P2G sealant
  • 1x primer

Need it installed?

Contact us to get a quote