ADR Quick Release Starlink Mini Mount for RV, Trailer & Van Roofs

Price
$195
Taxes and shipping calculated at checkout

Extra Base Plates:

No extra base plate
PNW-Based Business

PNW-Based Business

Expert Advice Available

Expert Advice Available

Products Tested in Real Builds

Products Tested in Real Builds

Safe & Secure Checkout

Safe & Secure Checkout

Frequently bought together

ADR Quick Release Starlink Mini Mount for RV, Trailer & Van Roofs
ADR two-piece quick release Starlink Mini mount with a black roof base plate and a black cage holding the dish on a white background
This item: ADR Quick Release Starlink Mini Mount for RV, Trailer & Van Roofs

No extra base plate

Price
$195
Scanstrut DS-HD6 Cable Seal Kit w/ ADR Backing Plate and 15 Ft. Starlink Cable
Scanstrut DS-HD6 Cable Seal Kit w/ ADR Backing Plate and 15 Ft. Starlink Cable
Scanstrut DS-HD6 Cable Seal Kit w/ ADR Backing Plate and 15 Ft. Starlink Cable
Price
$79.99
Total price: $274.99

ADR Quick Release Starlink Mini Mount for RV, Trailer & Van Roofs

This two-piece quick-release mount from ADR Concept and Designs gives your Starlink Mini a dedicated spot on a trailer roof, RV roof, fiberglass van top, or any flat surface, without locking the dish there for good. The flat base plate stays permanently on the roof. An upper cage holds the Starlink Mini, floats over the base, drops into place, and locks down with set screws.

Leave the base installed and back off the set screws to lift the cage and dish off in about 30 seconds when you want to store it, secure it inside, or set it up away from the vehicle. Dock it back onto the base and tighten the set screws when you are ready to roll. If you run more than one rig, you can install a base on each roof and move the same Starlink Mini and cage between them.

Installation video: Watch the ADR Starlink Mini quick release RV and van mount video

Key Features

  • Two-piece design: A base plate stays permanently on the roof. An upper Starlink Mini cage docks onto that base and comes off with the dish.
  • Set-screw quick release: The cage floats over the base, drops into place, and locks with set screws. Back the set screws off and lift the cage off in about 30 seconds. The base stays on the roof.
  • Move one dish between rigs: Install a base on each trailer, RV, or van and move the same Starlink Mini and cage from one base to another.
  • Made for Starlink Mini: Sized for the Starlink Mini dish, which measures 11.75 x 10.2 x 1.45 in according to Starlink.
  • Cage retention: Raised corner retainers on the cage locate and hold the Starlink Mini.
  • Permanent base install: Rubber pads sit under the base. The plate fastens down with screws at four points, in two pairs, on a trailer roof, RV roof, fiberglass van top, or any flat surface.
  • Cable routing: The Starlink cable runs into the mount. Pair it with a Scanstrut cable entry seal and an ADR Mini DC cable bulkhead for a clean, weatherproof pass-through next to the base.
  • Low-profile black finish: Black base plate and cage keep the install clean and understated on the roof.

Specifications

  • Compatible dish: Starlink Mini
  • Starlink Mini dimensions: 298.5 x 259 x 38.5 mm (11.75 x 10.2 x 1.45 in)
  • Mounting surfaces: Trailer roof, RV roof, fiberglass van top, or any flat surface
  • Mount style: Two-piece quick release. The cage docks onto the base and locks with set screws.
  • Base fastening: Screws at four points (two pairs), with rubber pads under the base
  • Removal time: About 30 seconds (back off the set screws and lift the cage off)
  • Finish: Black
  • Brand: ADR Concept and Designs

What’s Included

  • ADR quick-release Starlink Mini mount (flat roof base plate and Starlink Mini cage)
  • Starlink Mini dish sold separately

Pairs well with: Scanstrut DS-HD6 Cable Seal Kit w/ ADR Backing Plate and 15 Ft. Starlink Cable and Starlink MINI DC Power 5M Cable.

Need it installed?

Contact us to get a quote